DAC Support

DAC Module Configuration

DAC modules (silk screening may not be present on all boards)	Setup for Rev 6.x and higher DAC III and CD III Setup for all DAC IV	Setup for Rev 5.x and lower all Platinum, Plus, DAC II
2nd Generation DAC modules (configurable)	R62 Populated R60, R61, C22 Not Populated	R62 Not Populated R60, R61, C22 Populated Resistors 220 ohm cap is .1 uF
Signature DAC Rev 3.5 modules (configurable)	R149 Populated R147, R148, C23 Not Populated	R149 Not Populated R147, R148, C23 Populated Resistors 220 ohm cap is .1 uF
Signature DAC Rev 3.2 newer modules (configurable)	R62 Populated R60, R61, C22 Not Populated	R62 Not Populated R60, R61, C22 Populated Resistors 220 ohm cap is .1 uF
Signature DAC Rev 3.2 older modules (not configurable)	R60, R61 Not Populated READY TO BE USED WITH DAC III OR IV	R60, R61, Populated CANNOT BE CONVERTED TO DAC III OR IV
This table will allow DAC modules to be configured correctly to be moved from one Platinum DAC to another. Make a note of the Motherboard rev number. Use it to configure the DAC module. Note that incorrect configuration may play music but may not sound great.

For support with older or LINK type products please check with Sound4Sale.com